PROGRAM MANAGER
DutiesYou will have overall programmatic responsibility for the funding, planning, execution, analysis and reporting of full-scale acoustic trials of USS JIMMY CARTER at Southeast Alaska Acoustic Measurement Facility (SEAFAC).You will be responsible for acoustic testing of all Research, Development, Test and Evaluation (RDT and E) equipment associated with JIMMY CARTER through complete developmental cycle.You will be responsible for advanced undersea system equipment testing and training evolutions.You will be responsible for advanced undersea system testing conducted at contractor facilities throughout the United States, at-sea on host platforms, at the M241 barge at the Bangor waterfront.You will provide training facilities, logistics and assets for advanced undersea system personnel aboard the M241 to mitigate need for at-sea testing and increase operational tempo.You will procure field deployable measurement systems that are compatible with other NSWCCD acoustic systems and ensure they are sufficiently staffed for maintenance and operation.You will ensure that contracts associated with the M241 are in place and executed to ensure efficient on-water operations.You will ensure proper classification management and compliance of the M241 barge with Coast Guard and other applicable on-water regulations and maintenance.Requirements Conditions of EmploymentMust be a US Citizen.Must be determined suitable for federal employment.Must participate in the direct deposit pay program.New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.govWithin the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.Males born after 12-31-59 must be registered for Selective Service.This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sitesYou must be able to travel on military and commercial aircraft for extended periods of time.You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.This is a Cyberspace Workforce position, work role code System Testing Evaluation Specialist, proficiency level advanced, the incumbent is required to obtain and maintain qualifications in DoDM 8140.03 Cyber Workforce Qualand Dept of Navy policies.Successful completion of a pre-employment drug test (including marijuana) is requiredA tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the testYou will be subject to random testing.You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointmentQualifications Your resume must demonstrate at least one year of specialized experience equivalent to the next lower pay band ND-04 (GS-12/13 equivalency) in the federal service or equivalent experience in the private or public sector as a professional engineer managing or leading the funding, planning, execution, analysis or reporting of an engineering program using advanced techniques and knowledge to support the developmental cycle of submarines.Additional qualification information can be found from the following Office of Personnel Management website:
AND Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.ORCurrent registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORSuccessful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.Additional informationThis position is covered by the Department of Defense Priority Placement Program.Additional vacancies may be filled by this announcement.A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPLA BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.Occasionally work is required at test sites involving long periods of:
- Standing or walking over rough terrain and uneven surfaces.- Climbing in, out, on and around machinery, vehicles, ships and submarines.- Lifting and carrying heavy equipment weighing up to 40 lbs.You may be regularly exposed to the hazard of high levels of noise, extremes in temperature and humidity and adverse weather and sea conditionsHowever, the hazard can be reduced through the use of standard operating procedures and/or safety equipmentHelp A career with the U.Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new windowLearn more about federal benefits. Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offered.How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcementYou will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:
ENGINEERING PROJECT MANAGEMENTMECHANICAL ENGINEERINGPARTNERINGSYSTEMS TESTING AND EVALUATIONYou should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection processIf selected, you may be required to provide supporting documentation.If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.Please follow all instructions carefullyErrors or omissions may affect your rating or consideration for employment.All eligibility and qualifications must be met by the closing date of this announcement. Recommended Skills Architecture Electronics Engineering Physics Finance Heavy Equipment Human Resources Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
AND Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.ORCurrent registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORSuccessful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.Additional informationThis position is covered by the Department of Defense Priority Placement Program.Additional vacancies may be filled by this announcement.A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPLA BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.Occasionally work is required at test sites involving long periods of:
- Standing or walking over rough terrain and uneven surfaces.- Climbing in, out, on and around machinery, vehicles, ships and submarines.- Lifting and carrying heavy equipment weighing up to 40 lbs.You may be regularly exposed to the hazard of high levels of noise, extremes in temperature and humidity and adverse weather and sea conditionsHowever, the hazard can be reduced through the use of standard operating procedures and/or safety equipmentHelp A career with the U.Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new windowLearn more about federal benefits. Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offered.How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcementYou will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:
ENGINEERING PROJECT MANAGEMENTMECHANICAL ENGINEERINGPARTNERINGSYSTEMS TESTING AND EVALUATIONYou should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection processIf selected, you may be required to provide supporting documentation.If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.Please follow all instructions carefullyErrors or omissions may affect your rating or consideration for employment.All eligibility and qualifications must be met by the closing date of this announcement. Recommended Skills Architecture Electronics Engineering Physics Finance Heavy Equipment Human Resources Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
